 |
|
|
|
|
|
|
|
|
Features & Benefits
Offers economy as well as performance, strength and waterproof permanence. Freeze-thaw stable.
Acid & UV resistant, Safe to use with potable water. Electrically non- conductive. Environmentally Safe!
Flat to semigloss finish to make repairs and painting easier.
Self-hardening, 2 part product (A & B) must be mixed thoroughly. Batter like consitancy.
Open working time about 1-3 hours. Cures hard overnight (24 hour full cure).
0% shrinkage.
Slightly Translucent, Khaki Color
Gripping Flexibility, strongly adheres to almost any clean surface . . . including ceramic, fiberglass, foam, glass, metal, plastics, resin, stone, wood, and more.
Can be seamlessly feathered before set-up, or sanded, tapped, lathed or otherwise tooled after.
User friendly paste. Non-flammable, non-hazardous, no fumes. Complies with ASTM D.4236.
Clean up with Apoxie® Safety Solvent or water.
|
|
|
|
Apoxie® Paste is available in this color:
Khaki  |
|
|
|
|
Click here to download an Adobe PDF information sheet for this product.
Click here to go to download Adobe Reader.
|
|
|
|
|
Apoxie® Paste
Sizes / Ship Wts / Prices / Color:
|
2 fl. oz.
|
Ship Wt 1 lb.
|
$7.50
|
Khaki
|
|
8 fl. oz.
|
Ship Wt 1 lb.
|
$14.00
|
Khaki
|
|
32 fl. oz.
|
Ship Wt 3 lbs.
|
$32.00
|
Khaki
|
|
2 gallon
|
Call for Info
|
$200.00
|
Khaki
|
|
|
|
|
|
|
|
|
100's of Ways to Create & Repair!
CRAFTS & HOBBIES
Stained glass art, Use with kits and models, fill molds, Add color to your projects using tints!
REPAIRS & RESTORATIONS
Antiques; toys; dolls; ceramics; pottery; vases; statues; museum and outdoor displays; and more. Many home, school and professional uses.
ART, DESIGN, MODEL MAKING
& SPECIAL EFFECTS
Create or add to models; fill & cover seams, cracks, and armatures; bond pieces; fabricate or extend parts; create dioramas, relief maps; create natural-looking rocks, bases, waterfalls, theme park projects, and other scenic effects. Exterior quality. Much more!
Be Creative With Your Own Uses!
|
|
|
Directions & Recommendations
- *Wear appropriate disposable gloves [e.g., vinyl or nitrile] when blending parts A&B... [S 37]
- *To make paste thinner, gently heat Part A package in hot water or microwave package in 10 second increments (no more then 40 seconds) to a brush-able state.
- *Caution, product will be Hot & Sticky! Allow product to cool before handling or mixing with Part B. Heating this product will accelerate working time.
1. Measure equal parts of A & B. Both have a batter-like consistency. Use of a craft stick & a disposable mixing surface or vessel is highly recommended.- 2. Mix vigorously, about 2 minutes, until product feels warm and a uniform color is achieved. *Note that incomplete mixing will give poor results. Paste can be tinted with a small amount of paint or pigment after mixing (A+B) to match or create a desired color. A little colorant goes a long way.
- 3. Paste is now ready to use and has a working time of 1-3 hours. It can be spread thick or thin with a tool/craft stick, or poured for casting.
- 4. Clean up with soap & water or Aves Safety Solvent, which is also very helpful for smoothing.
*24 hour cure time is required for product to be waterproof and for hard finishing purposes such as sanding, tapping, drilling & painting. - *Wear goggles & dust mask when sanding/grinding cured Paste... [S 39/36]
- *Keep containers sealed when not in use.
- *Keep out of reach of children...[S 2]
- *Extend shelf life by refrigerating or freezing.
|
|
|
